Back to Help
Features

Gear Indicator

Shows your current gear in large digits on the dashboard. Available with Premium in mobile v1.4.0 and later. For automatics whose stock cluster does not show the gear, or for anyone who wanted an add-on shift indicator.

Published · November 17, 2026·Updated · November 20, 2026

1.Two methods

MethodBest forWhat you need
From the TCMATA definition for your car (see the supported cars below). If there is none, use "Find TCM data"
Calculated from gear ratiosMT / DCTGear ratios, final drive ratio and tire size (from a preset or entered by hand)

On automatics with a slipping torque converter, and on CVTs, the gear cannot be worked out from rpm and speed. In that case, without TCM data the display shows "--" (we would rather show nothing than a wrong number).

2.Supported cars

CarTransmissionMethodStatus
Suzuki Swift Sport (ZC33S)6ATTCMVerified. Set up automatically when you connect
Suzuki Swift Sport (ZC33S)6MTGear ratiosVehicle preset available
Suzuki Every (DA17W)4ATTCMVerified. Set up automatically when you connect
Subaru WRX STI (VAB) / Impreza WRX STI (GRB, GVB)6MTGear ratiosVehicle preset available (shared)
Subaru BRZ (ZD8) / Toyota GR86 (ZN8)6MTGear ratiosVehicle preset available
Subaru BRZ (ZC6) / Toyota 86 (ZN6)6MTGear ratiosVehicle presets available (two, by model year)
Toyota GR Yaris (GXPA16)6MTGear ratiosVehicle preset available
Other MT / DCT—Gear ratiosWorks once you enter the gear ratios
Other AT—TCMTry "Find TCM data"

Even for the same model, the transmission computer can differ by year and trim, so it may not work on every car.

  • The BRZ (ZC6) / 86 (ZN6) final drive ratio differs by model year, so there are two presets (before and after the August 2016 update). Choose the one that matches your car. Before the update, the 86 G without the Torsen LSD and the BRZ R without the Performance Package have a final drive ratio of 3.727: after choosing the preset, change the final drive ratio to 3.727
  • For the GR Yaris RC (205/45R17), change the tire size after choosing the preset (the preset uses 225/40R18)
  • On the GR Yaris, 5th and 6th gear use a different final drive ratio from 1st–4th, so the preset’s 5th and 6th gear ratios are converted values that include that difference (they differ from the catalog values of 1.081 and 0.902)

3.How to use

  1. Put "GEAR" in a dashboard slot (in Twin Meter you can also choose a ring display)
  2. In the slot details › Gear settings, choose the transmission type
  3. Supported cars are set up automatically when you connect. For a manual, choose a vehicle preset or enter the gear ratios, final drive ratio and tire size
  4. For any other automatic, use "Find TCM data": the app searches the TCM while the car is stopped (up to 90 seconds) → then just drive normally for about 10 minutes → review the result

The desktop app shows the gear on the GT View tachometer and the dashboard from v1.0.23. Drives imported before you updated need to be transferred again from your phone after updating.

About Twin Meter →

4.Experimental feature

Reading the gear from the TCM relies on manufacturer-specific data, so each car model has to be supported individually. Only a few cars are supported so far. We'll add more as users share scan records, and closer in-app integration is on the way.

5.Send us your scan files (help add your car)

From the "Find TCM data" result screen, or "Share scan files" in Gear settings, you can zip your scan records and send them by email. Even if nothing was found, sending them lets us take a look and possibly add support.

The address is shown on the share screen in the app. If you choose Mail, the recipient and subject are filled in for you. If you can't send it, contact us through the contact form.

  • In the email, please include the make, model code, year and transmission
  • Included: rpm, vehicle speed, throttle, transmission (TCM) responses, app version, gear settings and your support ID
  • Not included: location, driving route, VIN or video
  • For now we accept scans by email. In-app sharing and automatic delivery of newly supported cars are on the way

6.FAQ

The display stays at "--".

Either no TCM data has been found yet, or the gear ratios have not been entered. For an automatic, try "Find TCM data"; for a manual, choose a vehicle preset or enter the gear ratios.

Can I show gears on past recordings?

No. The gear is determined by the settings and data at the time of recording.

Will the other gauges become slower?

The app reads the TCM only while rpm is steady, giving priority to rpm and other values. On cars or adapters that respond slowly, showing fewer items helps.

Does it work on both iPhone and Android?

Yes, on both.

Download OBD NINJA

Free on iOS and Android.